- 110-piece Taps and Dies Set, Made of Alloy Steel
- 2017-12-20 19:48
-
Model Number: GM-T100610-GM-T100635
Brand Name: GM
Key Specifications/Special Features:
Material: alloy steelSpecification and quantity:35-piece taper taps: M6 x 1.0, M8 x 1.25, M10 x 1.0, M10 x 1.5,M11 x1 .5, M12 x 1.25, M12 x 1.75, M14 x 1.25,...
- Digital Level, Size of 30cm
- 2017-12-02 12:25
-
Model Number: GM-ZGX-DL006
Key Specifications/Special Features:
Sizes: 30cm or 12 inches (level)Resolutions: 0.01 at 0 to 1° and 89 to 90°, 0.05°at restHorizontal level measuring ranges: 0 to 360°Accuracies: ±0.1 at 0° and 90 ±0.2° atrestMeasure...
- 5PC 65MN HOLE SAW
- 2017-10-27 02:59
-
Model Number: GM-HS257
Brand Name: GOLDMOON
Key Specifications/Special Features:
5PC 65MN HOLE SAW26-32-45-56-63mm HOLE SAWH=25mm
Shipping Information:
FOB Port:
Shanghai
Lead Time:
25
-
...
- 71pcs bit sets
- 2017-10-18 01:13
-
Model Number: GM-DB339
Brand Name: GOLDM00N
Key Specifications/Special Features:
- 60 bits, 25 mm long: 3x slot 4 mm, 3x Slot 6 mm 3x PH 1, 6x PH 2, 3x PH 3 3x PZ 1, 6x PZ 2, 3x PZ 3 3x 4 mm, 3x 5 mm, 3x 6 mm Internal Hexagon 3x T10, 3x T15, 3...
- 12 pcs Machine Taps & Dies Set
- 2017-09-27 16:46
-
Model Number: GM-TD173-#5321
Brand Name: GOLDMOON
Key Specifications/Special Features:
12 pcs Machine Taps & Dies SetSize included:5 pcs Taps: M6x1, M7x1, M8x1.25, M10x1.5, M12x1.75, 5 pcs Round Dies: M6x1, M7x1, M8x1.25, M10x1.5, M12x1.75...
- Roller Frames, White End Cap
- 2017-09-19 03:11
-
Model Number: GM-ZGX-RF01
Key Specifications/Special Features:
5 wire cageWhite end capChrome-plated wireDiameter: 7.8mmBrown plastic handle with iron ringAmerican thread inside handleWire material: steel
Shipping Information:
FOB Port:
Sha...
- Cutting Disc
- 2017-09-18 08:06
-
Model Number: GM-GT213-1
Brand Name: GOLDMOON
Key Specifications/Special Features:
Cutting Disc Size: 230x3x22.23mm Cutting wheel has a better capability and durability as well as safety performance.We can supply size from ...
- Cutting saw, made of hardened alloy high carbon steel blade
- 2017-08-30 05:18
-
Model Number: GM-ZGX-CS011
Key Specifications/Special Features:
Blade material: hardened alloy high carbon steel bladeAvailable teeth types: cross ground hardpoint orresharpenableAdvantages:Maximum-value saw for DIY and normal useReinforced back...
- 18 pcs SDS Hammer Drill Bits Set
- 2017-08-20 03:19
-
Model Number: GM-DB111
Brand Name: GOLDMOON
Key Specifications/Special Features:
18 pcs SDS Hammer Drill Bits SetSize:2 pcs each szie: 6, 10, 12mm x 160m 2 pcs: 16mm x 210mm 1 pc each size: 12, 16, 20, 22mm x 450mm 2 pcs Flat Chisel: 14 x 25...
- Brad Point Wood Drill Bits, Comes in Black and White
- 2017-08-13 16:33
-
Model Number: GM-B150030-GM-B150250
Brand Name: GM
Key Specifications/Special Features:
Descriptions:High wear abilityShank: straight shankSurface: black and whiteMaterial: HSSSizes: 3.0 to 25.0mmApplications:Drilling accurateSplinter-free holes...
- 5 pcs Roughing End Mills Set
- 2017-08-01 15:20
-
Model Number: GM-DB057
Brand Name: GOLDMOON
Key Specifications/Special Features:
5 pcs Roughing End Mills Set4 FluteSize: 10mm - 12mm - 16mm - 20mm - 25mm x 5 pcsSurface treatment are available:Galvanized finish,Nickel Plated,Chrome coated,Black...
- S16x4x305mm pointed chisel with TPR handle
- 2017-07-18 18:50
-
Model Number: GM-ZGX-CS20223
Key Specifications/Special Features:
Materials: 40CR, 40 CRV, 50CR and 50 CRVWith longer life and heat treatedSurface available: sandblast, electrophoretic paint, paintspraying, powder spraying, black finished and el...
